Life Cycle Cost Comparisons – from Galvanizers Association of Australia
08-May-07
Steel is one of the most versatile material known to man.
|
Glass cullet in recycling
28-May-04
A look at the ways in which recycled container glass (previously used for bottles, jars and other similar glass vessels) can be used with consideration for the building industry. Article.
|
Boulevard Project, Camden – Fibre Reinforced Paving
02-Apr-04
A pilot area of fibre reinforced paving has now been laid on the Parkway, off Camden High Street, covering an area of 100m2. Project.
|
Suspended floors for industrial use: an overview
26-Mar-04
The similarities and differences between suspended industrial floors and conventional ground-supported floors are discussed, considering only floors with concrete wearing surfaces finished by power trowelling. Technical Brief.
|
Changes in important quality properties of continuous pressed laminates (CPL) with some changes ...
20-Feb-04
Industrial grade particleboard and fibreboard have been recognised through the wood industry as an ideal substrate for laminated panel constructions, using various types of overlay surfacing materials. Technical Brief.
|
Full depth repair mortar with blended extension aggregate
20-Feb-04
Sto Corp, the innovative world leader in cladding, coating and restoration systems, has announced the national roll out of Extended Full Depth Repair Mortar (CR311CIX). Product.
|
Concrete flooring finishes
30-Jan-04
A wide range of concrete floor finishes are available to suit the requirements of the end user. Topic
|
Effect of standards on skid resistance testing in clay pavers
23-Jan-04
A review of the test methods required by BS EN 1344 compared with the previous requirements of the now superseded BS 6677 and the contribution made by Ceram Building Technology. Article.
|
Durability of traditional plasters with respect to blast furnace slag-based plaster
28-Nov-03
Blast furnace slag is a residue of steel production..
|
Joint leader
16-May-03
A cement-based grouting material for tiles has been developed, which is of low porosity and so offers enhanced durability compared with conventional materials, and may be used as an alternative to epoxy grouting except under conditions of long-term exposure to strong acids. Abstract.
|
| page:
«
1
2
»
|
 |
| top |
|
 |
