If you’re looking to permanently cover up surface imperfections in existing
concrete, or turn a plain-jane slab from drab to fab, concrete overlays are
the perfect option. With today’s decorative overlays, it’s easy to
give almost any concrete surface, indoors or out, a complete face-lift—and
at a much lower cost than removal and replacement. The real challenge is choosing
from among the many resurfacing products available—and the diverse array
of decorative finishes possible.
The Concrete Network,
the largest and most comprehensive source for concrete information on the web,
offers a guide to the different types of decorative concrete overlays available
to homeowners, contractors and designers. There are four different types of
concrete overlays to choose from which include: stampable overlays, microtoppings
and skim coats, spray-down systems, and self-leveling overlays.
The characteristics of each type are highlighted, providing all of the necessary
information to choose the right resurfacing system for their particular project.
Selecting the most appropriate option often involves weighing performance attributes
against aesthetic value. Although cement-based overlays have been around for
decades, many of today’s systems blend polymer resins with cement, sand,
and other additives to improve performance, wear resistance, and aesthetic qualities.
A stamped overlay offers all the aesthetic benefits of conventional stamped
concrete but is less time- and labor-intensive to install. The overlay mix is
usually applied by a gauge rake (a tool with an adjustable depth gauge for achieving
a uniform topping thickness) and then imprinted with stamping mats or texturing
skins.
Ultra-thin microtoppings are applied by a trowel or squeegee in thin layers.
They can go on silky smooth and can be taken down to a featheredge. Or you can
apply several coats to create a textured broomed or troweled finish.
Spray-down systems offer a wide array of finish options. Usually they are sprayed
evenly onto concrete with an air-powered hopper gun, but they can also be applied
as a splatter coat to create a textured, slip-resistant surface.
Self-leveling toppings have the ability to self level without troweling, making
them ideal for smoothing and leveling worn or uneven concrete surfaces. Installers
simply pour or pump the material onto the surface and then use a spreader to
distribute it evenly.
Posted 17th August 2006
|
