| Ancon Lintels are manufactured from stainless steel and do not require any further corrosion protection. The standard range of Ancon Lintels is designed to suit the majority of loading conditions found in residential and commercial buildings. Special lintels can be manufactured to suit architectural features, heavy duty applications and wall constructions not covered by the standard range. Single Leaf Lintels / Angle Lintels These lintels carry a single leaf, usually the external leaf, of a cavity wall. The lintel can be supplied with lips to either leg if required. Single leaf lintels require a separate damp proof course. Channel Lintels Designed to fit solid walls up to 225mm wide, the Channel Lintel can be supplied with welded metal lathing on any side to provide a plaster key. Solid Wall Lintels For use with solid walls, the Standard Duty Solid Wall Lintel has a top flange built into the brickwork. The Light Duty version is suitable for spans up to 2700mm. Eaves Lintels Eaves lintels are built into the inner leaf at eaves level. Metal lathing is welded to the underside to provide a plaster key. Box Beam Lintels For use with solid wall constructions Box lintels can be supplied with welded metal lathing to provide a plaster key on any side. Timber and Steel Frame Lintels These lintels are designed to support the external brickwork over openings in timber or steel framed buildings. Timber frame lintels are supplied with retaining clips and should be used with a separate damp proof course. |